Verify The Software Version - Avaya S8300 Series Replacement Manual

Job Aid: S8300 Communication Manager and co-resident SES: Replacing the S8300C or S8300D Server or
CMM <Embedded Messaging>
●
10. Press Enter.
The following processes are initiated:
- The server's hard drive and internal CompactFlash are partitioned and reformatted.
- The Linux operating system is installed.
- Communication Manager software is installed and the progress is reported.
- If elected, Communication Manager Messaging is installed.
The process takes about 30 minutes. When the server is ready to reboot, the CD drive door
opens or the CD is ejected, and a reminder to check the Avaya Support Site
(support.avaya.com/downloads) for the latest software and firmware updates displays.
The reboot takes 1-3 minutes without Communication Manager Messaging and 3-6 minutes
if it is present.
11. At your laptop click Start > Run to open the Run dialog box.
12. Type ping -t 192.11.13.6 and press Enter.
13. Wait for the reply from the server to ensure connectivity to it.
14. Connect USB CompactFlash reader if present. Connect USB Modem if present.

Verify the software version

To verify the software version that you just installed:
1. Visit https://192.11.13.6, login using the default password..
2. On the Communication Manager Server Management Interface Web page, under the
Administration menu, click Server (Maintenance).
3. Select Server > Software Version.
The system displays the Software Version screen.
4. Verify that the server is running the appropriate software by observing the CM reports as:
field. For example, if Communication Manager Release 5.2 software is installed, the CM
reports as: field displays R015x.02.0...
5. Verify that the DVD/CD-ROM drive opened or the CD was ejected at the end of the software
installation.
6. Disconnect the DVD/CD-ROM drive from the server's USB port.
28 Job Aids for Field Replacements (FRUs) for the Avaya S8300 Server with the G700 Media Gateway