Avaya S8300 Series Replacement Manual page 15

- User Name
- Password
- Host Name
- Directory
- CompactFlash (S8300C only)
Local PC Card (CompactFlash available on S8300C and S8300D)
●
d. Click the Start Backup button.
e. If Communication Manager Messaging is installed on the S8300, back up
announcements:
- Return to the Backup Now screen and uncheck all but Announcements for
Communication Manager Messaging.
- Select the Backup Method and enter the login destination information as in Step .
- Click the Start Backup button.
3. Install the new hard drive or S8300 Server.
!
CAUTION:
Be sure to wear a properly grounded ESD wrist strap when handling the S8300
CAUTION:
Server, hard drive. Place all components on a grounded, static-free surface when
working on them. When picking up the hard drive, be sure to hold it only on the
edges — do not touch the bottom of the hard drive.
Note:
If you are replacing a hard drive only only and the Communication Manager
Note:
release at the time of the replacement is pre-3.0, use the FRU procedure
appropriate to the release. Then if desired, upgrade to Communication Manager
5.2 according to the appropriate Installing and Upgrading documentation.
a. Shutdown the S8300 Server using either the Web interface or the manual Shutdown
button on the S8300 faceplate.
- On the Server (Maintenance) Web page, select Shutdown Server under Server.
Select the Delayed Shutdown option, uncheck the Restart server after shutdown
checkbox, and click Shutdown.
- Alternatively, you can manually initiate a shutdown by pressing the Shutdown button
on the S8300 faceplate. Hold the button in until the green LED (OK to Remove) starts
blinking.
b. When the OK to Remove LED is on steady or when you are certain that the server has
powered down you can continue with Step c. If you are also replacing the media gateway,
you can power it down.
At the customer site
03-300528 Issue 6 May 2009 11