At The Customer Site - Avaya S8300 Series Replacement Manual

Job Aid: Replacing the G700 Media Gateway
In addition, if the G700 contains an S8300 (primary controller or LSP):
7. Create and download a new license file from the RFA Website. The new license file must be
associated with the serial number of the new G700. Save the license file on the laptop hard
drive that you will use at the customer site. Do NOT download a new password file. Be sure
to obtain the file with the .lic extension.

At the customer site

In the following procedures, you will use your laptop to access both the G700 (via a direct serial
connection) and the primary controller (either via a direct connection or over the LAN). You will
need to alternate between these two connections several times.
Perform the following procedures at the customer site:
1. Set up connections to the G700, primary controller, and LSP:
a. (Only if the G700 Media Gateway is functional) Direct connection to the G700 — using
a serial cable, connect a serial cable from your laptop to the Console port on the G700.
b. Connection to the primary controller —
- If the primary controller is local, connect a crossover cable from your laptop to the
Services port on the server.
- If the primary controller is at a remote location, set up a LAN connection to the primary
controller on a customer computer.
c. Connection to the LSP — if the G700 contains an S8300 configured as an LSP — after
the LSP is reinserted into the new G700, connect a crossover cable from your laptop to
the Services port on the S8300. This connection is needed only in Step
new license file.
Note:
If the primary controller is an S8500, S8700, or S8710, or an S8300 on a different
Note:
G700 that is not being replaced, you do not need to save translations at this
point.
2. If the primary controller is an S8300 in the G700 to be replaced, use the SAT interface to
save translations. Verify that translations were saved successfully.
Note:
If the G700 Media Gateway is not functioning, skip to Step 5.
Note:
42 Job Aids for Field Replacements (FRUs) for the Avaya S8300 Media Server with the G700 Media
22 to install the