Table of Contents
Advertisement
OPC8017 OPC8024 / OPD8017 OPD8024
7 Commissioning
WARNING
Hazard due to excessive current!
Excessive current could result in injury or damage.
Operate the device only with a power supply that complies with NEC
Class 2.
ATTENTION
Damage to the electronics!
The electronics can be damaged if the permissible voltage is exceeded.
Make sure to meet the permissible voltage for this device.
ATTENTION
Damage to the electronics!
The electronics can be damaged if plug-in connections are connected or disconnected while
power is still being applied.
Make sure that no power is being applied while connecting and disconnecting cables.
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
40
Advertisement
Table of Contents
