Table of Contents
Advertisement
OPC8017 OPC8024 / OPD8017 OPD8024
8.3.2 Replacing mass storage device
On the OPC8017/OPC8024, there may be a mass storage device in the service slot.
Removing mass storage device
1. Remove the cover plate.
To do so, undo the fastening screw (1)
(PH1 cross-tip screwdriver).
2. Grip the mass storage device by its removal
aid (2) and pull it carefully and parallel
along its guides (3) into the slot.
3. Then remove the mass storage device at an
angle in an upward direction (4).
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
45
Advertisement
Table of Contents
