OPC8017 OPC8024 / OPD8017 OPD8024
Should the control system have evident signs of damages caused, e.g., by transport, nonconformity
with the specifications, improper operation and storage conditions or due to improper use or handling,
the device must be shut down immediately. Ensure that it is secured against being started up
accidentally.
2.3.6 Warranty / repairs
During the device warranty period, any repairs must only be performed by the manufacturer or by
service personnel that has been authorised by the manufacturer.
2.3.7 Treatment and disposal of lithium batteries
WARNING
Hazard due to explosion
Danger of explosion if using incorrect battery types.
Use the battery type recommended by the manufacturer!
ATTENTION
Hazard due to thermal loads
The more the battery is exposed to higher temperatures, the faster it ages.
Operate the device within its specifications!
ATTENTION
Damage to the battery
Incorrect handling of the battery can cause it to be damaged or destroyed
Lithium batteries should not be exposed to fire, soldered, recharged, opened, short-circuited,
reversed or heated above 100 °C and they should be disposed of properly as well as
protected against sunlight, moisture and condensation!
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
16