Intended Use; Improper Use; Damage Due To Improper Use - ADS-tec OPC8017 Instruction Manual

Industrial it, full hd
Table of Contents

Advertisement

OPC8017 OPC8024 / OPD8017 OPD8024
The device can be operated under the environmental conditions (temperature, humidity, vibration and
shock) which are specified in the data sheet in chapter 10. Failure to observe any one of these
conditions will invalidate the warranty of the device. ADS-TEC cannot be held liable for any damages
arising from improper use and handling.
The climatic conditions were tested according to:
IEC/EN 60068-2-1
IEC/EN 60068-2-2
IEC/EN 60068-2-14
Protection class: IP65 according to DIN EN 60529

2.3.3 Intended use

The control system is designed for use in the pharmaceutical, food, beverage and chemical industries.
It was specially developed for the hygiene sector. The device is used for the visualisation and control
of a wide range of processes on systems and machines in various application environments.
The device is only to be assembled, installed and operated within the permissible specifications. Use
in non-specified environments is prohibited.

2.3.4 Improper use

Operation other than or beyond that described for the device shall be deemed improper use.
The device is not allowed to be used to control vehicles or for applications for which further approvals
beyond the manufacturer's declaration are necessary, e.g. applications with explosion hazard, medical
technology and shipping industry.
The device must not be put into operation in the case of transport damage or nonconformity with the
specifications and, if necessary, must be taken out of operation in the case of changing conditions.
In the case of improper use, ADS-TEC shall not accept responsibility or liability for injury or damage
that is directly or indirectly attributable to the handling of the device.

2.3.5 Damage due to improper use

ATTENTION
Risk of mechanical damage!
The device can be damaged as a result of unauthorised mechanical modifications.
 Make sure that the device is not drilled, chiselled or perforated and its exterior shape and design
is not modified in any way!
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Opc8024Opd8017Opd8024

Table of Contents