OPC8017 OPC8024 / OPD8017 OPD8024
6.3 Cabling
When connecting and disconnecting cables, make sure that no power is being applied to the
device or cables.
Connect the OPD and receiver module using the supplied cables for the power supply, HDMI
connection and USB connection.
6.4 Interfaces of transmitter module
The transmitter module is intended for top-hat rail mounting in the cabinet.
Figure 19: Interfaces of transmitter module
1
24 V
2
HDBaseT™ 100Mbit
3
USB 2.0
4
HDMI
5
SYS LEDs
Connect the receiver module to the transmitter module via the HDBaseT™ connection.
Recommendation for use:
The following CAT cables are recommended for connecting the transmitter to
the receiver module: CAT6a cable 80 m with min. 24AWG / 27AWG
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
36