OPC9000 series − Instruction manual v1.0
6 Commissioning
6.1 Requirements
ATTENTION
Hazard due to condensation
Damage to electronic components caused by condensation resulting from temperature fluctuations.
Switch on the device only after it has acclimated to the ambient temperature.
•
6.2 Switching the device on
The device can be started using the button on the rear side of the device:
The button has a blue LED and indicates the following states:
LED illuminated: device is on.
−
LED flashing: device is in an energy-saving state.
−
Alternatively, the device can be started using the capacitive button on the front side of the device:
This button can be activated and deactivated in the Configuration Center.
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
25