Table of Contents
Advertisement
OPC8017 OPC8024 / OPD8017 OPD8024
The device contains a lithium battery for supplying the system clock with power as long as the supply
voltage is not connected. The battery has a life cycle of 3-5 years depending on which load is applied.
It is in the service slot (chap.5.1).
The battery type to be used is:
lithium battery type CR2032 (230 mAh / 3 V)
Recommendation for use:
Use only the battery type recommended by ADS-TEC.
Replacing battery
1. Pull out the battery drawer (pull both sides of
the battery drawer at the same time).
2. Press the battery (1) (with the positive pole
facing upwards) into the drawer (2) until it
engages.
3. Turn the drawer (3) over so that the negative
terminal is pointing upwards.
4. Insert the drawer into its slot (4); the drawer
must engage in the slot.
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
1
2
3
44
Advertisement
Table of Contents
