Table of Contents
Advertisement
OPC8017 OPC8024 / OPD8017 OPD8024
Installing mass storage device
1. Insert the mass storage device into the
slot at an angle.
2. Lower the mass storage device and
push it back in all the way parallel to its
guides.
3. Position the retainer tabs of the cover
in the guide slots at an angle and close
the cover.
4. Screw in the fastening screw finger-
tight (PH1 cross-tip screwdriver)
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
46
Advertisement
Table of Contents
