Table of Contents
Advertisement
OPC8017 OPC8024 / OPD8017 OPD8024
4 Installation
ATTENTION
Damage caused by heat!
If the device is installed in a panel, casing or similar, heat accumulation can occur.
Make sure that heat can be dissipated from the device.
ATTENTION
Damage caused by heat!
If the device is exposed to sunlight or any other light or heat source, it can overheat and suffer
damage.
Do not expose the device to direct radiation by sunlight or any other light or heat source.
ATTENTION
Damage to the electronics!
If a device with data drive is not installed vertically, the electronics may suffer damage.
Install devices with data drive vertically only. Deviations must be arranged with ADS-TEC.
ATTENTION
Mechanical damage!
If the device is not mounted correctly, IP65 protection will not be provided.
Tighten the screws to a torque of 0.5 Nm.
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
20
Advertisement
Table of Contents
