Table of Contents
Advertisement
OPC8017 OPC8024 / OPD8017 OPD8024
Power supply
You will need a power adapter with the following technical data:
Input voltage: 18 to 30 V
Max. switch on current: 3 A (OPC8017) / 4 A (OPC8024)
For the power supply, use only the 4-pole plug connector (see the scope of delivery, chap. 3).
(The figure shows the socket inside the device).
1
NC*
2
0 V
3
FE
4
24 V
*
Can be used for shutdown function of a UPS
Earth connection
See chapter 5.3.
USB
The sockets comply with the USB 2.0 standard (white interface) and the USB 3.0 standard (blue
interfaces). The USB 2.0 interfaces are downward compatible to USB 1.0, and the USB 3.0 interfaces
are downward compatible to USB 2.0 and USB 1.0.
LAN
You can integrate the device in an Ethernet network which supports 1 Gbit/s. For this purpose, use the
1Gbit RJ45 LAN ports. If required, the necessary drivers can be downloaded at www.ads-tec.de. The
specifications for the network topology must be observed.
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
(NEC Class 2)
28
Advertisement
Table of Contents
