Status Indicators; Status Indicators On Transmitter Module - ADS-tec OPC8017 Instruction Manual

OPC8017 OPC8024 / OPD8017 OPD8024

6.5 Status indicators

6.5.1 Status indicators on transmitter module

The transmitter module has LEDs which indicate the status of the transmitter. They provide
information about the graphics link (HDCP), the power supply (PWR), the firmware (FW) and the
HDBaseT™ connection (HDBT).
The table below lists the various states.
Figure 20: Status indicators on transmitter module
LED signal
HDCP
Flashing
Off
PWR
On (blue)
Off
HDBT
On
Flashing slowly
Flashing rapidly
Off
FW
Flashing
Off
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
Action
Graphics link is present
No graphics link
The device is supplied with voltage via
POWER and is ready for operation
No power supply
HDBaseT™ link present
Low Power Mode
Ethernet Fallback Mode
No link
Firmware is loaded and ready for
operation
No firmware action
38