Table of Contents
Advertisement
OPC8017 OPC8024 / OPD8017 OPD8024
6 HDBaseT™ Extender Kit
WARNING
Hazard due to excessive current!
Excessive current can cause overloading of the electronics which could
then result in injury or damage.
Operate the device only with a power supply that complies with NEC
Class 2.
Figure 16: Use of extender kit
The HDBaseT™ Extender Kit allows data transmission between the computer and OPD over
distances of up to 100 m. The scope of delivery is given in chapter 3.
6.1 Installation of receiver module
Open the service slot.
Slide the receiver module into the mounting slot.
o
The catches of the two retainer tabs on the receiver module must engage in the
retainer clips.
Figure 17: Installation of receiver module
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
34
Advertisement
Table of Contents
