Upper Status Bar<2; Display <3; Lower Status Bar<4; Data Selector <5 - Physiomed IONOSON-Jubilee Operating Instructions Manual

Controls and Indicators
2.1.2 Upper Status Bar<2>
The upper status bar <2> shows indications or some of the corresponding parameters
selected. For example:
2.1.3 Display <3>
On the display <3>, you can select all of the instrument's menus and parameters on dif-
ferent levels except for the intensity. The selection is carried out with the data selector
<5>.
2.1.4 Lower Status Bar<4>
In the lower status bar<4>, messages and prompts are issued, e.g.:
PLEASE SELECT A FUNCTION
2.1.5 Data Selector <5>
To select a parameter, move the cursor to the respective field by turning the selector. Af-
ter pressing the selector, the cursor will start flashing. You will then be able to select the
parameters by turning the selector and confirm the selected value by pressing the selector
again (cursor stops flashing). The modified values are displayed in the upper status bar
<2> or at the respective position of the display <3>.
4
.
G IONTOPHORESIS
.
Use the data selector <5> to select the therapy parame-
ters and to operate the instrument by means of the cur-
sor. After switching on the instrument, the cursor is lo-
cated at the current mode G of the display <3>.
You can move the cursor to the other menu items by
turning the selector to the right or left. To select a menu,
simply press the selector.
upper status bar
display
lower status bar
IONOSON-Jubilee