Physiomed IONOSON-Jubilee Operating Instructions Manual page 18

Table of Contents

Advertisement

Controls and Indicators
Current Mode
Current Mode
Current Mode
12
Frequency (possible values: 2 – 200 Hz)
Relation contraction (Tension, 1 s) / pause (Release, 1 s),
possible values T = 1 – 60 s, R= 1 – 60;
manual release key (only if R > 1s)
Ramp (4 settings m
1
ting is displayed in the upper status bar.
T/R
Pulse time (possible values: 1s – 0.1 ms)
Release time (possible values: 7 s to 1 ms; manual release key)
Pulse shapes (square-wave pulse r
lar pulses d
– d
, exponential pulse e
1
3
played in the upper status bar.
AMF
Intensity display (mA), to be set with intensity control <6>
5 pre-set frequency bands,
fixed frequency (Select 0 – 250 Hz)
Basic frequency (possible values: 2.0 – 9.5 kHz)
KOTS
Intensity display (mA) to be set with intensity control I <6>
Tension time (possible values: 1 to 60 s in steps of 1s;
manual release key (only if R > 1s)
Release time (possible values: 1 to 60 s) in steps of 1s
Ramp (4 settings m
1
ting is displayed in the upper status bar.
Modulation frequency (selectable: 0 – 95 Hz)
Pulse shape (sine, triangle, rectangle)
Pulse length T
(possible values: 2 ms, 4 ms, 6 ms, 8 ms, 10 ms, auto)
to m
) with different rise times. The current set-
4
, trapezoidal pulses t
1
). The current setting is dis-
1
to m
) with different rise times. The current set-
4
– t
, triangu-
1
3
IONOSON-Jubilee

Advertisement

Table of Contents
loading

Table of Contents