Upper Status Bar<2; Display <3; Lower Status Bar <4; Data Selector <5 - Physiomed vocaSTIM-Master Operating Instructions Manual

Controls and Indicators
2.1.2 Upper Status Bar<2>
The upper status bar <2> shows indications or some of the corresponding
parameters selected. For example:
2.1.3 Display <3>
On the display <3>, you can select all of the instrument's menus and parameters
on different levels except for the intensity. The selection is carried out with the data
selector <5>.
2.1.4 Lower Status Bar <4>
In the lower status bar<4>, messages and prompts are issued, e.g.:
.
A FUNCTION
2.1.5 Data Selector <5>
4
.
GALVANISATION
Use the data selector <5> to select the therapy
parameters and to operate the instrument by
means of the cursor. After switching on the
instrument, the cursor is located at the current
of the display <3>.
mode
G
To select a parameter, move the cursor to the
respective field by turning the selector. After
pressing the selector, the cursor will start
flashing. You will then be able to select the
parameters by turning the selector and confirm
the selected value by pressing the selector again
(cursor stops flashing). The modified values are
displayed in the upper status bar <2> or at
the respective position of the display <3>.
Upper Status Bar
Display
Lower Status Bar
PLEASE SELECT
vocaSTIM -Master
®