Table of Contents
Advertisement
10.2 Ultrasound
The symbols have the following meaning:
To alter a parameter, proceed as follows:
(1) Choose
SETMENU
(2) Change to the second page (ultrasound) if required.
(3) Select the desired parameter with the data selector <5> and confirm.
(4) Set the desired value of the parameter. The modification will be confirmed visually
and by an acoustic signal.
(5) Quit the basic setup.
The selected settings are immediately valid.
IONOSON-Jubilee
Unit of ultrasound dose for dose control <8>
2
in W or W/cm
Dose threshold, i.e. where instrument switches from continuous
to pulsed mode in the mode
Acoustic signal when increasing the dose
2
every 0.1 W/cm
Connection of coupling confirmation and timer:
timer runs only with successful coupling
YES
timer runs independently of coupling
NO
Dose limit after coupling of ultrasound waves:
ose cannot be increased after coupling
d
YES
dose increment is possible after coupling
NO
Back to the basic settings for stimulation current
Quit basic settings
on the display <3>.
cont.
Basic Settings
47
Advertisement
Table of Contents
