Physiomed IONOSON-Jubilee Operating Instructions Manual page 45

The setup menu provides an additional option to choose whether or not it is possible to
increase the dose after the ultrasonic waves have coupled to the patient's tissue (light at
the transducer goes out).
Warning Make sure you constantly keep moving the transducer on the skin of the
patient (dynamic treatment)! Avoid using the transducer at one spot for a
longer time (static treatment); this form of treatment might lead to damages
on the patient's tissue!
Note If the transducer is lifted during treatment, the stimulation current will
automatically be reduced to 0; it males sure that both therapy modes - ul-
trasound and stimulation current - are always applied simultaneously. As
soon as the transducer is put on again the stimulation current will also rise
again automatically.
For additional information on the ultrasound dose and other treatment parameters see the
supplied therapy booklet Instructions for ultrasound therapy.
IONOSON-Jubilee
Simultaneous Therapy
39