Table of Contents
Advertisement
Current Modes DF, MF, CP,
Current Modes UR,
Current Modes HV,
Current Mode
Current Mode
IONOSON-Jubilee
LP
Switching in a galvanic basis (5%).
The current setting is displayed in the upper status bar.
IG
30,
IG
50, FM,
Switching from monophase to biphase pulse emission. The current
setting is displayed in the upper status bar.
TENS
Switching from monophase to biphase pulse emission. The current
setting is displayed in the upper status bar.
Pulse time (possible values: 40 µs – 400 µs)
Burst frequency (possible values: OFF; 1 – 10 Hz),
Frequency bands (for HV and TENS 70 – 150
Hz or 1 – 150 Hz) or fixed frequency (1 – 200
Hz). The currently selected frequency is dis-
played in the upper status bar.
FaS
Switching from monophase to biphase pulse emission. The current
setting is displayed in the upper status bar.
Acoustic signal, makes every current pulse audible
T
: Pulse time, possible values: 0,1 – 10 ms
i
R
: Release time , possible values: 10 – 250 ms
i
Pulse shape (triangle, rectangle)
Basic settings: T = 1ms, R = 20 ms, triangular pulse
Relation contraction (Tension, 1 s) / pause (Release, 1 s),
possible values T = 1 – 60 s, R= 1 – 60;
manual release key (only if R > 1s)
Ramp (4 settings m
1
ting is displayed in the upper status bar.
HVS
Switching from monophase to biphase pulses. The current setting is
displayed in the upper status bar.
Acoustic signal, makes every current pulse audible.
STOCH
to m
) with different rise times. The current set-
4
Controls and Indicators
11
Advertisement
Table of Contents
