90
7.10.2 Creating the equipotential bonding
The earthing cable conducts away any static charging to ground.
Fig. 47: Creating the equipotential bonding
①
(1) - Screw
(2) - earthing cable
To create the equipotential bonding:
1.
Attach the earthing cable (2) to the motor using the screw (1).
2.
Lay the earthing cable (2) to the rear side of the control.
3.
Attach the cable lug (3) of the earthing cable (2) to the rear
side of the control.
(3) - Cable lug
Operating Instructions 275 - 02.0 - 08/2019
Setup
②
③