DURKOPP ADLER 275 Series Operating Instructions Manual page 95

Setup
Operating Instructions 275 - 02.0 - 08/2019
Setting the brightness of the LEDs and the display
To set the brightness of the LEDs and the display:
1. After calling up the special functions, press sequence button 2.
 All LEDs are switched on.
The display (3) shows the Brightness
selection:
2. Set the brightness using the buttons
Information
The brightness can be changed in 8 levels.
Level 3 is set when the machine is delivered.
3. Save the desired brightness by pressing the button
twice.
 The LED above the button goes out.
The system switches out of the special function mode back
into normal operation.
.
93