Setup
Operating Instructions 275 - 02.0 - 08/2019
7.4.2
Assembling the tabletop to the stand
Machines without DAC mini
Fig. 38: Machines without DAC mini
To assemble the tabletop to the stand
1.
Fasten the table plate to the stand with wood screws according
to the dimensions shown above.
Machines with DAC mini
For machines with a DAC mini multiple width controller and edge
cutter, in addition to the normal steps for completing the
tabletop ( p. 77) the DAC mini, distribution box, sewing lamp
transformer and knee switch must also be installed.
79