DURKOPP ADLER 275 Series Operating Instructions Manual page 24

22
Fig. 3: Inserting or changing the needle
①
(1) - Needle bar
(2) - Screw
To insert or change the needle:
1. Turn the handwheel until the needle bar (1) reaches the top
dead centre.
2. Loosen the screw (2).
3. Pull the needle out towards the bottom.
4. Insert the new needle.
Important
Align the needle so that the groove (4) faces the hook (3).
5. Tighten the screw (2).
②
(3) - Hook
(4) - Groove
Operating Instructions 275 - 02.0 - 08/2019
Operation
④
③