Cleaning The Filter Element - DURKOPP ADLER 275 Series Operating Instructions Manual

72
2. Place the collection tray under the drain screw (3).
3. Loosen the drain screw (3) completely.
4. Allow water to drain into the collection tray.
5. Tighten the drain screw (3).
6. Connect the machine to the compressed air supply.
6.3.3

Cleaning the filter element

NOTICE
Damage to the paintwork from solvent-based cleaners!
Solvent-based cleaners damage the filter.
Use only solvent-free substances for washing out the filter
tray.
Fig. 34: Cleaning the filter element
①
②
(1) - Filter element
(2) - Water separator
To clean the filter element:
1. Disconnect the machine from the compressed air supply.
2. Drain the water condensation ( p. 71).
3. Loosen the water separator (2).
4. Loosen the filter element (1).
5. Blow out the filter element (1) using the compressed air gun.
(3) - Drain screw
Operating Instructions 275 - 02.0 - 08/2019
Maintenance
③