DURKOPP ADLER 275 Series Operating Instructions Manual page 51

Operation
Operating Instructions 275 - 02.0 - 08/2019
Options during sewing
Process
Stopping sewing
Continue the sewing
process
Sew a corner
Sewing a multiple width
without a DAC mini
Sewing a multiple width with
a DAC mini
Sew an intermediate bar-
tack
To remove the sewing material:
4. Finish the seam without end bartack: Activate the bartack
toggle button ( p. 46).
5. Finish the seam with end bartack: Press the pedal to
POS. -2 and hold it down.
 The thread is cut off.
The machine stops.
The needle is up.
The sewing foot is raised.
6. Release the pedal and remove the sewing material.
Description
Press the pedal to POS. 0.
The machine stops.
The needle is down.
The sewing foot is down.
Press the pedal to POS. 1.
The machine sews at the speed speci-
fied by the pedal.
Press the pedal to POS -1.
The machine stops.
The needle is down.
The sewing foot is up.
Turn the material around the needle.
Activate the multiple width
button  p. 46.
The multiple width is sewn with the set
value
Deactivate the multiple width button.
Sewing continues without multiple
width.
 p. 92
Activate the manual reverse sewing
button  p. 46.
The machine sews in reverse while the
button is pressed.
The speed is determined by the pedal.
49