Programming; Dac Mini - DURKOPP ADLER 275 Series Operating Instructions Manual

Programming

Operating Instructions 275 - 02.0 - 08/2019
5 Programming
5.1

DAC mini

The DAC mini allows programming and semi-automatic calling of
different multiple widths within a seam.
You can save up to 30 different programs, each with up to 8
different multiple width sequences. The current multiple width is
shown in the display in every sequence and can be manually
changed at any time.
Switching from one sequence to the next is performed using the
knee switch or automatically when the thread is cut at the end of
a seam.
Fig. 28: DAC mini
① ②
(1) - Button smooth sewing
(2) - Sequence buttons
(3) - Display
(4) - Plus-/Minus-buttons
Button Function
Button for smooth sewing
The Plus/Minus buttons should be used to assign an
upper transport value to this button, which is to be
used for sewing material without crimping.
The green LED above the button lights up when the
function is switched on.
③ ④ ⑤
(5) - Activation/Deactivation button
(6) - Button F (Enable/Function)
(7) - Direction change button
⑥ ⑦
51