Smooth Sewing - DURKOPP ADLER 275 Series Operating Instructions Manual

Programming
Operating Instructions 275 - 02.0 - 08/2019
Information
The machine performs an internal system self-test when switched
on. The machine is not ready for operation during this self-test.
On completion of the system self-test the last program used is
briefly shown in the display. After this, the LED above the button
for the first active sequence of this program is switched on and
the associated upper transport length is displayed.
 The machine is ready for operation.
5.1.1

Smooth sewing

1. To sew smoothly:
1. Press the button
 The green LED above the button lights up.
The display shows the current upper transport length.
Information
The upper transport length can be adjusted using the Plus/Minus
buttons if the sewing results are not satisfactory.
The changed setting of the upper transport length is stored imme-
diately.
.
53