Operation
Operating Instructions 275 - 02.0 - 08/2019
4.10.2 Setting the second upper transport length
(optional)
When using mechanically or electropneumatically switched mul-
tiple widths (additional equipment) a second (larger) upper trans-
port length can be set at the adjusting wheel.
Fig. 18: Setting the second upper transport length
(1) - Adjusting wheel
To set the second upper transport length:
1.
Turn the adjusting wheel (1):
• Larger second upper transport length: Turn the adjus-
ting wheel (1) counterclockwise.
• Smaller second upper transport length: Turn the adjus-
ting wheel (1) clockwise.
The pointer (2) shows the value that is currently set.
①
②
(2) - Pointer
37