DURKOPP ADLER 275 Series Operating Instructions Manual page 82

80
Fig. 39: Machines with DAC mini
②
①
⑤
(1) - Sewing lamp transformer
(2) - DAC mini
(3) - Distribution box
(4) - Knee switch
To assemble the DAC mini components:
1. Fasten the table plate to the stand with wood screws.
2. Mount the sewing lamp transformer (1) at position (5)
3. Mount the DAC mini (2) at position (6)
4. Mount the distribution box (3) at position (7)
5. Screw the knee switch (4) under the table plate in a position
allowing it to be easily operated using the right knee.
(5) - Positioin for sewing lamp trans-
former
(6) - Position for DAC mini
(7) - Position for Distribution box
Operating Instructions 275 - 02.0 - 08/2019
Setup
③
④
⑥
⑦