You can view the system information, and set the device parameters, VLAN, link aggregation, IP
address and route. Take 4-port PoE switch for example. The quick setting interface is different
depending on the models of switch. The actual interface shall prevail.
2.1
System Information
You can view the name, type, serial number, software version, IP address, port status and port
information of the device.
After logging in the system, the Quick Setting interface is displayed. See Figure 2-1. On the switch, if
the port shows green, it means the port is connected successfully. And If the port shows gray, it
means the port is not connected or the connection fails.
Parameter
Port
Port Type
2
Quick Settings
Figure 2-1
System information
Table 2-1 Port information
Description
Displays all ports of the switch.
The demonstrated switch contains 7 ports. Port quantity might vary
depending on the model you purchased, and the actual product shall
prevail.
Three types: Access, Hybrid, and Trunk.
2