Delete A Test; Export A Test; Install A Test - Ametek Chatillon CS1100 User Manual

Display the "TEST SELECTION" screen, press on the test file Icon to select it then press on
the "EDIT" button.
The "TEST SETTINGS" screen is displayed. If the test data has not been exported etc,
press on the "HOME" button at the top left of the screen to redisplay the "HOME" screen.
To edit the test, step through all the screens by pressing on the "NEXT" button, changing any
settings as required then finally press the "FINISH" button. This modified test will then be
available ready for use.

10.12 DELETE A TEST

This feature is useful if a test file is no longer required.
WARNING! All data in the test file will be deleted by this procedure
so if the previous test data is required, open the file then print and/or
export the data before using this feature.

10.13 EXPORT A TEST

This feature is useful for backup purposes or to transfer a test file from one CS Force Tester
to another CS Force Tester. This can be used to ensure that 2 or more Force Testers in a
Laboratory are running the same test files. Note that the test file only contains test setup
information and does not contain any test results.
The test file can be exported directly to the network if the Force Tester is connected to the
network via an Ethernet cable (see section 3.8).
Alternatively, the test file can be exported to a USB stick if this is connected into one of the
unused USB sockets on the control console.
Display the "TEST SELECTION" screen, press on the test file Icon to select it then press on
the "EXPORT" button.
A "Save As" dialog is displayed with the test name already entered. Please note that this
filename must not be manually changed because this will not alter the restored filename.
Also note that the filename has a "tst" suffix and this must not be changed.
Select the required storage drive using the top drop down box, select the required storage
folder in the main area of the dialog then press on the "SAVE" button to save the test setup
to this location.

10.14 INSTALL A TEST

This feature is required to transfer a test file into the Force Tester.
A previously exported test file can be imported from a USB stick or directly from the network
if the Force Tester is connected to the network via an Ethernet cable (see section 3.8).
Display the "TEST SELECTION" screen then press on the "INSTALL" button.
An "Open" dialog is displayed. Select the required drive using the top drop down box, select
the required folder in the main area of the dialog then locate the setup file. Press on the
"OPEN" button to install this test setup to the Force Tester. . Note that the test file only
contains test setup information and does not contain any previous test results.
CS User Manual 97