Defining A Test; Notes - Ametek Chatillon CS1100 User Manual

6.0 DEFINING A TEST

The Force Tester can be used in a number of different ways: -
1 Perform a Single Stage Test without Saving Data (Quick Test)
2 Create a Compression Test File, Perform Tests and Save Data
3 Create a Tension Test File, Perform Tests and Save Data
4 Create a Multi-Action Test File, Perform Tests and Save Data
5 Load a Previously Defined Test, Perform Tests and Save Data

6.1 NOTES

Option 1 does not store any test data, although the data can be exported and/or printed.
Options 2, 3 and 4 create test files that are used to store the test parameters, test results
and graphical data. These files are used to test samples immediately after the file is created
but can also be used to test further samples at a later date. This allows the statistics of
many samples to be viewed and analyzed.
The machine can store a maximum of 50 Tests.
CS User Manual 43