Installation Notes; Splinter Shield - Ametek Chatillon CS1100 User Manual

14.0 INSTALLATION NOTES

14.1 SPLINTER SHIELD

A transparent splinter shield (part number is 01/3909) is available as an option to enclose
the test sample (see section 14). A shield should be fitted if there is any danger of samples
shattering during the test. The shield has an electronic interlock such that the test cannot be
started until the hinged shield is closed. While not mandatory for many applications and
countries, CHATILLON strongly recommends that users consider fitting this optional item.
If a shield fitted with electronic interlock is used, an error message will be displayed on the
control console if the door is open when a test is started.
If a shield fitted with electronic interlock is used, an error message will be displayed on the
control console and the test in progress will be aborted if the door is opened during a test.
110 CS User Manual