Test Notes; Loading A Saved Test File - Ametek Chatillon CS1100 User Manual

Statistics Table (OPTIONAL - Selected during the test configuration)
Run Number (OPTIONAL - Selected during the test configuration)
Excluded
All Test Results
Notes (If any have been added by the user)
This data may be preceded by the
An example export is shown below: -
Test Runs,11
Passed,11
Failed,0
Excluded,0
Result,Max,Min,Rng,Avg,Std Dv,COV
Date (),,,,,,,
Time (),,,,,,,
Peak (N),85.10,11.57,73.53,29.98,23.08,77.01,
Break (N),85.10,12.68,72.41,34.64,24.55,70.89,
Run,Excluded,Date,Time,Peak (N),Break (N),Dist@P (mm),Dist@B (mm),Notes,
1,,12/11/12,12:26:08,51.43,51.43,46.99,46.99,,
2,,12/11/12,12:26:49,48.91,35.94,24.52,31.83,,
3,,12/11/12,12:28:09,44.66,30.14,21.65,26.72,,
4,,12/11/12,12:30:29,85.10,85.10,48.56,48.68,,
5,,12/11/12,12:31:13,11.57,,34.56,,,
6,,12/11/12,12:32:05,13.63,12.68,42.11,45.58,,
7,,12/11/12,12:32:51,11.77,,44.14,,,
8,,12/11/12,12:33:49,15.19,,46.32,,,
9,,12/11/12,12:34:33,13.01,12.87,38.02,38.75,,
10,,12/11/12,12:35:16,14.07,,42.18,,,
11,,12/11/12,12:36:12,20.40,14.28,34.03,40.15,,

10.6 TEST NOTES

1 If a percentage drop break detector is used to end the test, the Force at Break value is
not a "True" break value but is the specified percentage of the maximum force value.
2 If a time duration result is requested, this may be slightly longer than the actual test
time duration because of latency at the start of the test.
3 If a hold time is specified, the results for the hold stage are measured at the end of the
hold duration.
4 If a preload is required, a suitable value is 1% of the expected maximum force.
Values as high as 5% of the expected maximum force can be used, but this may
affect the sample height if the height feature is used.
5 If a test question has been defined, then this is shown as a question mark (?) on the
graph screen due to space limitations. The actual question is shown on the "DATA
TABLE" screen.

10.7 LOADING A SAVED TEST FILE

Every test file created using the "Compression Test", "Tension Test" or "Multi-Action Test"
Icons on the "HOME" screen is stored in the internal memory and can be easily retrieved for
analysis or further testing.
90 CS User Manual
Result Headers if selected during the test configuration.