Jog Panel - Ametek Chatillon CS1100 User Manual

4.13 JOG PANEL

The crosshead (moving arm) can be moved up and down to position it ready for testing. This
is achieved by using the Jog Control Panel, which is displayed by pressing the "Jog Panel"
Icon in the bottom left hand corner of the screen.
Note that this control panel is accessible from any screen (except the "LOGIN"
screen) and is closed by pressing on the Icon again.
The Large Up arrow moves the crosshead upwards at maximum speed and the Large Down
arrow moves the crosshead downwards at maximum speed.
The Small Up arrow moves the crosshead upwards at the defined Slow Jog Speed and the
Small Down arrow moves the crosshead downwards at the defined Slow Jog Speed.
In each case, the crosshead only moves while the relevant button is pressed and will stop
when the button is released.
The actual load and distance values are displayed on the Jog Control Panel and these
values can be zeroed by pressing on the zero button (Ø).
The crosshead can be automatically driven back to a previously defined zero position (Auto
Return) by pressing on the return button. Note that the machine will continue to move even
when the button is released and will stop when the distance display shows 0.00.
CS User Manual 37