Using The Force Tester; Performing A Test - Ametek Chatillon CS1100 User Manual

10.0 USING THE FORCE TESTER

10.1 PERFORMING A TEST

A test can be performed whenever the
This screen will be displayed immediately after defining a new test or can be displayed by
loading a saved test file - Please refer to section 11.
The "TEST GRAPH" screen displays the test name at the top of the screen, a "Blank" main
area, a load and distance display, test result area and "Start Test" button as shown below.
The sample now has to be fitted or positioned ready for testing.
If the crosshead (moving arm) needs to be moved up or down, press the "Jog Panel" Icon at
the bottom left hand corner of the screen to display the Jog Control Panel.
"TEST GRAPH" screen is displayed.
CS User Manual 77