Question Screen; Test Results Screen - Ametek Chatillon CS1100 User Manual

8.6 QUESTION SCREEN

After the Export Settings have been set, press on the "NEXT" button at the bottom of the
screen to display the "QUESTION" screen.
This screen allows a single question to be displayed either before a test or after a test. If NO
question is required, press on the "NEXT" button at the right of the screen to display the
"TEST RESULTS" screen.
If a question is required, select the required option then press on the "Label" entry area to
display an alphanumeric keypad. Enter the required Label then press on the ENTER button.
Press on the "Question" entry area to display an alphanumeric keypad. Enter the required
Question then press on the ENTER button.
Note that the "Label" cannot be more than 7 characters long but the "Question" can consist
of up to 22 characters. The "Label" is used to display the information on the screen but the
"Question" is used to display a user prompt on the question dialog. (See later).
8.7

TEST RESULTS SCREEN

After the question has been set, press on the "NEXT" button at the bottom of the screen to
display the "TEST RESULTS" screen.
CS User Manual 55