Description; Application Range; Scope Of Delivery; Accessories - iDM AERO ILM 2-7 Technical Documentation Installation Instructions

1. General description
General description

1.14. Description

AERO ILM is a compact air-water-heat pump with
modulating scroll capsule compressor with largely
By a special speed-controlled radial fan large volume
A copper-welded stainless steel plate heat exchanger
is used as condenser. The machine frame consists of
perfectly. The housing is thus completely without a
thermal bridge and thus features optimum sound in-
sulation values.
The heat pump is complete from a hydraulic view-
the safety device, an expansion container, the electric
heating rod, the priority valve respectively the HGL-
The heating controller (Navigator 2.0) developed es-
eration via a smart phone.
The heat pump is designed in compact construction,
the evaporator is mounted in the top part of the heat
and is tested in the plant to ensure its perfect function.

1.15. Application range

For monovalent heating and cooling of detached and
semi-detached houses in appropriate climatic envi-
ronments. The building should be furnished with a
heating, low-temperature radiator heating ...).
The heat pump must be used only for domestic, but
not for commercial operation, eg production of pro-
cess heat.
6
AERO ILM heat pumps function with the safety re-
frigerant R410A which, if in the event of a proper as-
sembly and installation circulates in a closed circuit,
represents practically no environmental impact.

1.16. Scope of delivery

- Heat pump aggregate with modulating scroll cap-
-
-
- HGL-plate heat exchanger (only ILM HGL type)
-
- Speed-controlled radial fan
- Refrigerant collection and dehydration
- Liquid separator
- 2 pcs. electronic expansion valves
- Refrigerant level indicator
- Pressure sensors for high and low-pressure moni-
-
-
- Installed switching valve for cooling/defrosting
- Suction air sensor
-
- 3-way valve for priority mode (ILM type) orHGL-
- Flow switch
- Electrical heating rod 6 kW for possible subsequent
- Heat and sound-insulated cover panels
- colored 7" touch display
-
-
- nonreturn valve (loose)
- 2 pcs. sound reduction mats to place below the
- network connector for myIDM integration

1.17. Accessories

see IDM price list
-
Installation instructions AERO ILM
sule compressor (AERO ILM 4-13) or rolling piston
compressor (AERO ILM 2-7)
as condenser
toring
monitoring
valve for HGL-mode (ILM HGL type)
heating
heat pump
(C) IDM ENERGIESYSTEME GMBH