Decoupling Of Buildings - iDM AERO ILM 2-7 Technical Documentation Installation Instructions

5. General description
Installation
The following shall be taken into account:
•
•
•
• Absorption caused by plants
•
10m
5m

5.6. Decoupling of buildings

If vibrations of the heat pump are transmitted via
as structure-borne noise. In order to minimize this in,
heat pumps should be decoupled from the structure
in so far as possible. The installation of heat pumps
should be omitted around the heat pump (as shown
in the illustration).
1. Betondecke
2. Trittschalldämmung
3. Estrich
4. Ausnehmung
5. Schalldämmmatte
5
4
3
2
1
24
10m
5m
Installation instructions AERO ILM
To the heat pump are enclosed two sound insulation
the mats must be placed under the heat pump. For
this purpose, the four feet can be adjusted in height.
adjustable
feet of the
heat pump
view from above
(C) IDM Energiesysteme GmbH