5. General description
Installation
5.14.
The AERO ILM heat-pumps are supplied according
side outlet. The electric and hydraulic connections
are therefore on the left-hand side.
If necessary, the connection side can be altered.
In the case of an outlet on the left-hand side, the up-
per, left-handed panel (panel opposite the outlet) has
to be mounted on the right-hand side. In this case
below.
If it is necessary to change the hydraulic pipework
itself, no changes to the heat pump are necessary.
The protective sleeves for the hydraulics and cables
are provided by the manufacturer on both sides.
to be installed as shown in the diagram below.
44
-
Installation instructions AERO ILM
In the next step the connecting cables next to the
and fastened with cable binders. All cover panels
are then remounted.
The screws on the panel have to be
carefully tightened manually.
5.15. Opening front panel
The front panel consists of the left and the right part.
At the bottom of the left part there is a handle. At this,
the left side is pulled forward, and then unhooked on
the top.
(C) IDM Energiesysteme GmbH