iDM AERO ILM 2-7 Technical Documentation Installation Instructions page 28

5. General description
Installation
5.9.3. Assembly instructions air inlet
The wall connection set on the inlet side consists of 4 rubber strips. These are included in the delivery contents
so that the surround the frame.
The horizontal elements are principally laminated on the front side. This guarantees an optimum leak tightness!
20
the cellular rubber on the inner side! The metal frame is thus surrounded completely with insulat-
ing material and cold bridge free!
28
870
Installation instructions AERO ILM
20
(C) IDM Energiesysteme GmbH
-