Description; Intended Use; Scope Of Delivery - iDM AERO SLM 3-11 Technical Documentation Installation Instructions

3. Description

3. Description
description
AERO SLM is a air-water heat pump with a scroll
capsule compressor with inverter technology.
The Indoor unit of the AERO SLM includes the con-
denser, a high-effi ciency loading pump and a sensor
set.
The outdoor unit includes the evaporator and the
axial ventilator.
The microprocessor controller NAVIGATOR 2.0 en-
sures effi cient operation of the heat pump. The heat
pump system is controlled as needed and is equipped
with a variety of monitoring-, security- and reporting
functions.
By default, one heating circuit can be controlled. Hea-
ting systems up to six heating circuits can be realised
with optional heating circuit extension sets.
The microprocessor controller NAVIGATOR 2.0 pro-
vides a variety of additional applications, e.g. Smart
Grid, Remote control or operation via Smartphones.
The heat meter is integrated by default.
A colored 7" touch display simplifi es the operation of
the heat pump.
The connections for the refrigerating pipes are on the
back side of the AERO SLM. With the AERO SLM
3-11, the connecting hoses for the heating can be led
out either on the right or left side of the heat pump.
With the AERO SLM 6-17, the hoses can only be led
out on the left side.
The LAN-connection, the cable inlet for the sensors
and the main power supply are on the backside of the
heat pump.
The lower the maximum fl ow temperature
is set, the higher is the effi ciency of the
heat pump.
The electrical lines and refrigerant connec-
tion pipes between the indoor- and out-
door unit are not in the scope of delivery
of the heat pump. The parts are available
as accessories and must be connected
according to the technical specifi cations.
8
Installation instructions AERO SLM
3. 1 . I nt e nd ed u s e
For monovalent heating and cooling of single- and
multiple dwellings with the heat source air. In this
case, the building should be equipped with a low tem-
perature heating systems (e.g. underfl oor heating,
wall heating or low temperature radiator heating). The
heat pump may only be used for domestic and not for
purely commercial operation!
The AERO SLM is working with the safety refrigerant
R410A, that circulates in an closed circuit. When ins-
talled and commissioned properly, meaning that there
is no environmental impact.
3. 2 . S co pe o f de li v er y
Outdoor unit AERO SLM
- Housing in sheet metal covering, powder-coated
- Fin evaporator
- Electronic expansion valve
- Axial ventilator with Flow-Grid
- Mounting kit for the installation of the outdoor unit
consists of:
4 pcs. threaded bolt M12 x 210 mm
8 pcs. hexagonal nuts M12
8 pcs. washers M12
Indoor unit AERO SLM
- Heat pump with Scroll-compressor with inverter
technology
- Inverter with patented CIC-Technology
- Copper soldered stainless steel plate heat ex-
changer as condenser
- Refrigerant collector
- Refrigerant dryer
- Refrigerant inspection glass
- Electronic expansion valve
- Electronic high pressure and low-pressure limiter
- High effi ciency loading pump integrated
- Colored 7" touch display with NAVIGATOR 2.0
- Stable base frame
- Cladding, insulated against heat and noise
- Flexible connection hoses
- Sensor package
- Non-return valve
(C) IDM ENERGIESYSTEME GMBH