Description; Application Range - iDM TERRA SWM 3-13 HGL P Technical Documentation And Installation Instructions

2. Allgemeine Informationen

2. Description

2 .1. Descr ipt ion
The iPump is a brine-water heat pump with a Scroll-
compressor with Inverter-technology.
The microprocessor controller NAVIGATOR 2.0 en-
sures effi cient operation of the heat pump. The heat
pump system is controlled as needed and is equipped
with a variety of monitoring-, security- and reporting
functions.
By default, one heating circuit can be regulated. Sys-
tems up to six heating circuits can be realized with
optional heating circuit extension modules.
A colored 7" touch display simplifi es the operation of
the heat pump.
The connections of the brine lines are inside the heat
pump. The connections for heating lines are also
inside. All connections can be feed out either on the
right or left side of the heat pump.
The LAN-connection, the cable inlet for the sensors
and the power supply are on the backside. The USB-
port is integrated in the front part and is closed by a
stopple when delivered.
TERRA SWM is available with HGL or with HGL and
process reversal (P). Thereby the heat pump can be
used for cooling.
The TERRA SWM heat pump is working with the sa-
fety refrigerant R410A. It circulates in an closed circuit
when installed and commissioned properly, meaning
that there is no environmental impact.
The lower the maximum fl ow temperature
is set, the higher is the effi ciency of the
heat pump.
6
2. 2 . App li ca t i o n r a nge
The TERRA SWM can be used for monovalent hea-
ting and cooling of single and multiple dwellings with
ground heat utilisation.
In this case the building should be equipped with low-
temperature heating (e.g. underfl oor heating, wall
heating, low temperature radiator heating).
The heat pump may only be used for domestic and
not for purely commercial operation!
Scope of delivery refrigeration circuit
- Scroll-compressor with Inverter-technology
- Inverter with patented CIC-Technology
- Copper soldered stainless steel plate heat
exchanger (Condenser and evaporator)
- Electronic expansion valve
- Electronic high pressure and low-pressure limiter
- High pressure switch
Scope of delivery heatsource- and heating side
- Integrated A-Label brine pump
- Integrated A-Label loading pump
- Brine expansion tank
Scope of delivery NAVIGATOR 2.0 controller
- Colored 7" Touchdisplay
- 1 heating circuit as standard
- simple solar-difference temperature control
- integrated heat quantity measurement
- PV-integration
- Maintenance via myiDM
- Layered solar supply with an additional solar board
With relevant accessories, the NAVIGATOR 2.0 can
be extended with a single-room control (NAVIGATOR
Pro).
General scope of delivery
- 5 pcs. fl exible connection hoses
- Non-return valve
- Sensor package
Installation instructions TERRA SWM
(C) IDM ENERGIESYSTEME GMBH