Setting Flashing Sequences - HomeMatic HM-Sen-EP Installation And Operating Manual

Current
Light on
When flashing sequences are being set, the head-
light flasher sensor is able to store the times for 5
pulses and pauses plus a tolerance value separately
for each of its two channels. An individual sequence
can be set for each of the two channels. These
sequences are channel parameters which can also
be set in the Web UI (if available).
Generally speaking, sequences which are
as long as possible and have low tolerance
values should be used for safety-related functions,
such as opening doors and gates. Simple sequen-
ces with high tolerance values may be triggered
accidentally and thus unintentionally open doors
and gates, for example (provided that the headlight
flasher sensor is within the wireless range).

8.2 Setting flashing sequences

Once you have installed the headlight flasher sensor,
a flashing sequence can be taught in to each of the
two channels. Since a flashing sequence which has
52
Pulse Pulse
Pulse
Time