Instrument Commands
:INSTrument:SLOT[:NUMBer]?
Returned Format
:INSTrument:IDENtify
:INSTrument:IDENtify:STOP
:INSTrument:HWRevision?
Returned Format
Keysight M8131A 16/32 GSa/s Digitizer User's Guide
The INSTrument subsystem contains queries to get information like
occupied AXIe slot number and M8131A hardware revision. Additionally, if
option -FP1 is installed, commands to update DPU FPGA images and to
access DPU FPGA registers are available.
Query
:INSTrument:SLOT[:NUMBer]?
Description
The query returns the instrument's slot number in its AXIe frame
[:INSTrument:SLOT[:NUMBer]] {slot_number}<NL>
Command
:INSTrument:IDENtify <seconds>
Description
The command identifies the instrument by flashing the green "Access" LED
on the front panel for a certain time.
<seconds> Optional length of the flashing interval in seconds, default is
10.
Command
:INSTrument:IDENtify:STOP
Description
The command stops the flashing of the green "Access" LED before the
flashing interval has elapsed.
Query
:INSTrument:HWRevision?
Description
The query returns the instrument's hardware revision number.
[:INSTrument:HWRevision] {hw_revision}<NL>
Remote Programming
135
4