FIELD
D-DNS Provider
Host Name
Interface
Username
Password
DSL
This page allows the user to modify the DSL modulation settings on the unit. By changing the settings, the user can specify which
DSL modulation that the modem will use.
For advanced DSL options press the Advanced Settings button.
The DSL advanced settings relate to test mode settings. The default selection is 'Normal'.
ADSL Tone Settings
For ADSL Tone Settings select the 'Tone Selection' button on the DSL Advanced Settings page.
The frequency band of ADSL is split up into 256 separate tones, each spaced 4.3125kHz apart. With each tone carrying separate
data, the technique operates as if 256 separate routers were running in parallel. The tone range is from 0 to 31 for upstream traffic
and from 32 to 255 for downstream traffic. Do not change these settings unless you are directed by your Internet Service Provider.
NF1ADV User Guide
53
Select the dynamic DNS provider from the list.
The name of the dynamic DNS provider.
Select the interface from the list.
Enter the Dynamic DNS account username.
Enter the Dynamic DNS account password.
Table 23: Advanced - DNS - Add Dynamic DNS Account Settings
Figure 73: Advanced – DSL
Figure 74: Advanced - DSL - Advanced DSL Settings
DESCRIPTION
YML38
www.netcommlimited.com