Dialing And Dialed Number Routing Principle; Instruction; Dialed Number Processing Flow - NetComm SmartVoice Gateway Reference Manual

5.

Dialing and dialed number routing principle

Instruction

• After a phone number is entered, dial # to call out immediately or, wait until the "Inter DTMF
Timeout" expires (defined in "Advanced Options", default=4 seconds).
• If the phone number fits the setting of Digit Map, the gateway dials out the phone number through
the assigned interface automatically.
• The phone number should have at least 2 digits (not including * and #).

Dialed Number Processing Flow

To maintain maximum flexibility, the number dialed will be looked up from several tables defined in the
gateway. Once no match can be found, it will look up again from the registered SIP Proxy Server. The
look up flow is shown below:
Speed Dial
Table
A complete flow chart is on the next page.
82
Local Phone
Extension
Number
Phone Book
Book
Manager
SIP
Proxy
SmartVoice Gateway(s) User Guide
YML832 Rev1