Maintenance And Lubrication - ODB LCT6000 Owner's Manual

This chart is only a reference, always consult the Owners Manual of the Engine, PTO, axles, hoist, etc. for
Check Engine Oil Level
Check coolant level
Check Fuel Filter
Lubricate Main Shaft Bearings
Lubricate PTO Bearings
Check Air Filter
Check / Clean Pre-Filter
Check Lug Nuts and Tire Pressure
Inspect Radiator and Radiator Screen
Check Engine as described in Engine's Owner Manual
Inspect Blower Housing Exterior
Check Trailer Lights and Turn Signals
Check Power Band
Inspect Impeller Thoroughly for Damage
Check All Nuts and Bolts for Tightness
Check Tow Bar for Damage / Wear
Check Bolt Hole where Tongue Connects to Trailer
Clean and Inspect Battery and Connections
Inspect Intake and Exhaust Hoses for Wear
Inspect All Ducts for Damage
Remove Blower Face and Inspect Liners for Wear
Check PTO / Clutch Adjustment
Grease / Inspect Wheeel Bearings for Corrosion or Wear
Inspect all Hydraulic and Fuel Lines for Leaks or Wear
ODB COMPANY
Maintenance Section

4.2 Maintenance and Lubrication

actual recommendations
(Use Hour Meter as a Guide)
ITEM DAILY/ 40 HOURS /
10 WEEKLY
HOURS
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
800-446-9823
80 HOURS /
2 WEEKS
X
X
48
LCT6000